Laser Screed FM2 Flooring
Laser-guided screeding places and levels large floor areas with automatic height control — the usual method for big, flat warehouse floors.
Industrial Flooring Contractor · Haridwar, Uttarakhand
Industrial Concrete Flooring, Built to Perform.
Vacuum Dewatering Flooring is our main service. Right after the concrete is laid and levelled, a vacuum pump draws the surplus water out of the slab — leaving a denser, harder floor that stands up to forklifts, racking and daily wear in warehouses, factories and industrial sheds.
- Harder, denser surface
- Much less dusting
- Fewer shrinkage cracks
- Site assessment first We look at the slab and the site before we quote.
- Slab to finish, one team Placing, finishing, cutting and coating without hand-offs.
- Mechanised execution Screeds, power trowels and diamond saws on every job.
- Planned around you Phased, night or shutdown working where needed.
Companies we have worked with
View all clients
Slab to finishOne team, one programme
About Vision Enterprises
A flooring contractor built around the working floor
Industrial floors are judged years after handover, under forklifts, racking and daily cleaning. We plan every job from that end point.
The Vision Enterprises is an industrial and commercial flooring contractor based at SIDCUL, Haridwar. We lay and finish concrete floors, treat and polish existing slabs, install epoxy systems, cut concrete and waterproof structures — for warehouses, factories, production units and commercial buildings.
Because the slab, its finish, its joints and its protection are handled by one team, they are planned as one system. Method and sequence are agreed before we mobilise, so the work fits your programme instead of interrupting it.
Our Services
Concrete flooring, finishing, cutting and waterproofing
Specialist services covering the life of an industrial floor — from placing and finishing a new slab to hardening, coating, altering and protecting it.
Densification Dust Proofing
A chemical densifier reacts inside the concrete and hardens the surface, so the slab stops shedding dust — with no coating on top to peel or wear through.
Concrete Floor Polishing
A densifier hardens the slab so it stops dusting; diamond polishing takes it further to a hard, reflective, easy-clean finish.
Truss Screed Flooring
Vibrating truss screeds strike off and compact wide concrete pours in one controlled pass, holding accurate levels over long spans.
Concrete Floor & Slab Cutting
Diamond saw cutting for control joints, slab openings, trenches and controlled demolition — clean, square cuts without breaking what stays.
Waterproofing Services
Membrane, coating, crystalline and injection systems chosen by area — terraces, basements, wet areas and tanks — starting with finding the leak.
Not sure which system your floor needs? Tell us how it will be used — we will recommend the specification.
Talk to Our Team
Why Choose Us
What working with us looks like on site
The difference on a flooring job shows up later — in a floor that still runs flat, clean and crack-free under daily traffic.
Professional Workmanship
Every pour, cut and coat is executed by crews who do this work daily, not by general labour learning on your site.
Durable Solutions
Specifications are chosen for the load, traffic and exposure your floor will actually see, so the surface holds up in service.
Modern Equipment
Truss screeds, vacuum dewatering sets, ride-on and walk-behind power trowels and diamond floor saws, matched to the job.
Attention to Detail
Levels, joint layout, edges and abutments are set out before work starts and verified as the pour progresses.
Quality-Focused Execution
Surface regularity, finish and curing are checked at each stage against the agreed standard before sign-off.
Reliable Project Support
Programmed around your site sequence, including night shifts and shutdown windows, with a single point of contact throughout.
Industries & Applications
Flooring by Industry
Flooring for the way your building is used
Warehouses & Logistics
Flat, hard-wearing floors for racking, forklifts and constant movement of goods.
Manufacturing & Factories
Floors built for machinery, production lines, spills and heavy wheeled traffic.
Pharmaceutical & Laboratories
Seamless, cleanable floors for controlled and hygiene-sensitive areas.
Food & Beverage Processing
Hygienic floors that handle washdowns, spills and wet working conditions.
Workshops & Service Centres
Oil-resistant, easy-clean floors for vehicle and equipment workshops.
Commercial & Retail Spaces
Durable floors that also have to look good in front of customers.
Parking & External Areas
Hard-wearing slabs for parking decks, yards, roads and approaches.
How We Work
From first call to final check
Four clear stages, agreed before we mobilise, so you know what happens on site and when.
-
01
Consultation
We discuss the intended use, loading, finish expectation and programme, so the right system is specified from the start.
-
02
Site Assessment
Substrate condition, levels, access, power and water are checked on site and the method statement is fixed around them.
-
03
Professional Execution
Trained crews carry out the works with the correct plant, in planned sequences that suit your site activity.
-
04
Final Quality Check
Finish, flatness, joints and curing are inspected, and the floor is handed over with clear aftercare guidance.
Quality & Safety
What we check before a floor is handed over
Most floor failures come from timing, preparation and curing — not from materials. These are the checks that control them.
- 01 Levels and surface regularity Checked strip by strip during the pour, and across the floor before handover.
- 02 Finish and hardness The surface is inspected for a consistent, closed finish with no weak or dusting patches.
- 03 Joints Saw cuts at the planned positions and depth, cut at the right time, and sealed where specified.
- 04 Curing Carried through the full period, because early drying undoes good workmanship.
- 05 Clean handover Site cleared, and written guidance on when the floor can take load and how to maintain it.
Site work follows basic safety controls throughout: barricading, PPE, wet cutting for dust control, and safe handling of power tools and materials.
Questions
All FAQs
Frequently asked questions
Straight answers on cost, choosing a floor system and how projects run.
What services does The Vision Enterprises provide?
Our main service is vacuum dewatering (VDF) flooring. We also provide laser screed FM2 flooring, densification dust proofing, concrete floor polishing, truss screed flooring, jointless concrete floors, concrete floor and slab cutting, waterproofing and epoxy flooring.
All services
Do you visit the site before quoting?
For most projects, yes. We look at the slab or substrate, levels, access, and the conditions the floor will face before quoting, so the price and the method reflect the actual job rather than an assumption.
How much does industrial flooring cost?
There is no honest flat rate for industrial flooring, because two floors of the same size can be very different jobs. The price depends on the floor area, the condition of the site and existing slab, the material or system, its thickness, the project requirements and specification, the location, and the full scope of work — including preparation, repairs, joints and finishing. We give a price once we understand these.
Which flooring is best for a warehouse?
For a new warehouse, a vacuum dewatered concrete floor — usually laid with a truss screed and often with a floor hardener — is the standard choice for strength and wear resistance. For an existing warehouse floor that is dusting, dustproofing is usually the most cost-effective fix. Where hygiene or sealing is needed, epoxy is used.
Warehouse and factory flooring
How long does an industrial flooring project take?
It depends on the area, the service, and how much of the site is available at once. Concrete floors are cast bay by bay and then need a curing period before heavy use; resin floors need time to cure before traffic. We give a programme with the quotation, including when each area can be back in use.
Ready to build a better floor?
Talk to our team about your flooring, concrete cutting or waterproofing requirement. We will visit, assess and quote.
Contact Us
Tell us about your project
Send the details and we will come back to you with the right approach and a quotation.
-
Address Near Denso Chowk
SIDCUL Bypass Road
Haridwar, Uttarakhand 249403 -
Business Hours Monday to Saturday — 9:00 AM – 7:00 PM Sunday — By appointment Site work can be scheduled at night or during shutdowns where needed.